recognition function of your Smart-phone is activated.
5.
SMART-PHONE CONNECTION
Smart-phone Pairing
①
Make sure your BiT-4 device is powered off.
② Press and hold
POWER BUTTON
for
8
seconds until the LED turns and flashes in Red and Blue
alternately.
[Voice Prompt: “Bluetooth pairing”]
③ Turn on the Bluetooth function in your Smart-phone and search and select the name of the
device
(ChatterBox
BiT-4
Vxx)
④ Certain Smart-phones may require a password <Password: 0000>
⑤
After pairing is completed, the Blue LED slowly flashes in every 2 seconds.
[Voice Prompt:
“Bluetooth Connected”]
⑥
After pairing is finished,
turn the power off and then turn on the device again in order to prevent
a sudden volume increase.
※NOTE for iPhone users
: After the pairing is done, please set the device at the minimum volume
level to prevent sudden volume increase. (Delete)
Second Smart-phone pairing
Pairing sequence is exactly the same as the first Smart-phone pairing.
※
CAUTION: Please make sure that you turn off the Bluetooth function of the first
paired-Smart-phone before starting the second Smart-phone pairing.
New Smart-phone (the third phone) replacement
①
Turn off one of the previously paired Smart-phones’Bluetooth functions or delete the paired
device
's name (ChatterBox
BiT-4
Vxx) from the connected Bluetooth device list in the
Smart-phone
set up menu.
② Pairing sequence is exactly the same as the first Smart-phone pairing.
6.
MODE CHANGE
Music Mode
:
