Unimig RWX 6000 Скачать руководство пользователя страница 9

Страница: 9 / 12

ADDITIONAL INSTRUCTIONS

• Be sure that the helmet is used in the correct condition and according to the SAFETY content.

• There is a liquid crystal-valve in the filter, although it has inner and outer protection plate, it is

important to avoid heavy knocks to the helmet.

• The outer protective shell of the helmet should be periodically inspected and cleaned. In the case

of a break, crack, pitting or other damage, the helmet shell must be replaced.

• To operate more efficiently and safely, please select the correct dark shade number.

• The arc light must be visible completely by the sensor. If not, the filter will be transparent or

unstable in darkness.

• Please use the automatic filter at a temperature between -10°C-65°C (14°F-149°F )

• Do not disassemble the filter. If any problems arise, please contact your local UNIMIG service

department.

REPLACEABLE PARTS

• Outer Lens - UMRBOP

• Inner Lens - UMRWXIP

• Harness - UMRWXHR

• Sweat Band - UMSB

OPERATING INSTRUCTIONS

RWX6000 Welding Helmet Manual |

0356 RWX6000 Helmet Manual MAY19.indd 9

8/05/2019 3:53:53 PM

Содержание RWX 6000












