12
RAZOR ARC 140/180
OPERATING MANUAL
6. Control Panel Details
6.1 MMA 'STICK' Mode
This indicates that the machine is in MMA mode. For MMA setup details see page 15.
6.2 DC LIFT TIG Mode
This indicates that the machine is in Lift TIG mode. For TIG setup details see page 20.
•
Note:
When Lift TIG mode is activated, all other functions are disabled except amperage
control and remote mode.
6.3 Manual Mode
This indicates that the machine is manual MMA mode. While in this mode the machine sets
no limits on amperage MIN/MAX and allows you full control of the Arc Force and Hot Start
settings.
WELDING PROCESS SELECTION
MMA ELECTRODE SIZE SELECTION
6.4 Electrode Pre-Sets
Each off these indicators are for the electrode sizes that the machine is pre-set to weld
with. When one of these are selected, the machine will automatically put limiters on
amperage settings based on recommended MIN/MAX. It will also automatically set the Arc
Force and Hot Start settings based on what works best for the selected size of electrode.
•
Note:
Size 4.0mm elecrtrode pre-set not available on the RAZOR ARC 140 Machine.
RAZOR ARC 140 - 180 Manual JUL23.indd 12
RAZOR ARC 140 - 180 Manual JUL23.indd 12
7/07/2023 2:19:27 PM
7/07/2023 2:19:27 PM
