Unimig KUMJRRW250MIG Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 48

background image

Core wire

Flux coating

Gas shield from flux melt

Arc with core wire melt

Flux residue forms slag cover

Weld metal

Power Source

+

▬

Core wire

Flux coating

Base metal

Protective gas

Arc

Slag

Weld pool

MMA (MANUAL METAL ARC) WELDING

One of the most common types of arc welding is manual metal arc welding (MMA) or MMA welding. An electric current is used to strike an arc between
the base material and a consumable electrode rod or ‘stick’. The electrode rod is made of a material that is compatible with the base material being

welded and is covered with a flux that gives off gaseous vapours that serve as a shielding gas and providing a layer of slag, both of which protect the
weld area from atmospheric contamination. The electrode core itself acts as filler material the residue from the flux that forms a slag covering over the

weld metal must be chipped away after welding.

• The arc is initiated by momentarily touching the electrode to the base metal.

• The heat of the arc melts the surface of the base metal to form a molten pool at the end of the

electrode.

• The melted electrode metal is transferred across the arc into the molten pool and becomes the

deposited weld metal.

• The deposit is covered and protected by a slag which comes from the electrode coating.

• The arc and the immediate area are enveloped by an atmosphere of protective gas

Manual metal arc ( stick) electrodes have a solid metal wire core and a flux coating. These electrodes
are identified by the wire diameter and by a series of letters and numbers. The letters and numbers

identify the metal alloy and the intended use of the electrode.

The Metal Wire Core works as conductor of the current that maintains the arc. The core wire melts
and is deposited into the welding pool.

The covering on a shielded metal arc welding electrode is called Flux. The flux on the electrode

performs many different functions.

• These include:

• Producing a protective gas around the weld area

•

Providing fluxing elements and de-oxidisers

• Creating a protective slag coating over the weld as it cools

• Establishing arc characteristics

• Adding alloying elements.

Covered electrodes serve many purposes in addition to adding filler metal to the molten pool. These

additional functions are provided mainly by the covering on the electrode.

RAZOR MIG 250 Manual |

35

MMA (STICK) WELDING GUIDE

«
...
33
34
35
36
37
...
»

Содержание KUMJRRW250MIG

















































Отзывы:

Нет отзывов

Похожие инструкции для KUMJRRW250MIG

Бренд: Samsung Страницы: 11

Бренд: HAI Страницы: 2

Бренд: Parkside Страницы: 201

Бренд: Parrot Products Страницы: 8

Бренд: Yamaha Страницы: 67

Бренд: Yealink Страницы: 8

Metalmaster 200d Pro DC GTAW

Бренд: Tokentools Страницы: 33

Бренд: biodex Страницы: 20

Бренд: GE Страницы: 28

HOME THEATER SPEAKERS

Бренд: Sonance Страницы: 8

Drive 4 Basic S

Бренд: EWM Страницы: 52

NX-108E - Security NetworX NX-4 System

Бренд: GE Страницы: 20

CoolBloC C34 DN 32

Бренд: PAW Страницы: 24

Бренд: Vigitron Страницы: 2

Бренд: Magicsing Страницы: 24

Бренд: K-array Страницы: 24

Бренд: McIntosh Страницы: 16

Бренд: SHIRE CONTROLS Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды