4
General instructions
•
Plastic bags and packaging materials pose danger for small children and animals.
•
Make sure you know your tool or machine and you are familiar with its operating procedure. Know the
hazards if not used correctly.
•
Person using this machine must be properly trained and must know how to safely operate this equipment.
He must be also aware of the hazards and risks that may occur if not used correctly.
•
Pay special attention to safety notes and safety labels. Do not remove or damage them.
If the warning label becomes unreadable or damaged please, contact your vendor.
•
Maintain your working area clean. Disorganized and dirty working area may cause accidents.
•
Never work in tight spaces or in purely lit rooms. Make sure the floor is solid and stable and that you can
move around easily. Maintain stable posture during work.
•
Stay focused and use all your senses. Pay attention to the working procedure. Do not continue to work if
you cannot pay attention.
•
Maintain your tools clean.
•
Handles must be kept free of grease and dirt.
•
Make sure no children, unauthorized persons or animals have access to your workshop.
•
Never put your hands or legs inside the working area.
•
Never leave your machine unattended during operation.
•
Use only for purposes for which it has been designed.
•
Use personal protective gear such as safety goggles, ear protection, respirator, safe working shoes etc.
•
Do not underestimate your abilities and know your limits. Use both hands.
•
Never work under the influence of alcohol or other drugs.
•
Do not use the machine/tool if you feel dizzy or week.
•
Any modifications or improvements to the machine are strictly prohibited. DO NOT USE if you discover
bent part, crack or other damage.
•
Never perform any maintenance during operation.
•
If you see any unusual sign or hear any strange sound, switch off your machine and stop working
immediately.
•
Do not forget to remove all wrenches and screwdrivers from the machine after use.
•
Before use, make sure all screws are tighten securely.
•
Perform maintenance regularly. Before use make sure the device is in good working conditions and
without any damage.
•
Use only original spare parts during repairs.
•
Using extension pieces or accessories not approved by the manufacturer may cause injuries to the
operating personnel.
•
Use this machine only for work that is capable of handling. Do not overload your machine or accessories.
Do not attempt to use machine with insufficient power to perform heavy duty work.
•
Do not overload your device. Measure the work load in such way, so it could be done with comfortable
speed. Damages due to machine overload are not covered by warranty.
•
Do not expose to extremely high temperature or direct sunlight.
•
This machine is not design for use in humid environments or under water.
•
if you are not using your machine, store it in a dry and safe place, out of reach of children.
•
Before use make sure that all safety elements work correctly and efficiently. Make sure all movable parts
are in good condition.
•
Before use make sure that no part is cracked or stuck, Make sure all parts are attached and assembled
9
•
When the front edge of the machine leaves the
edge of the work piece by 4 - 5 cm (see pic.)
move the cutting level down quickly to cut the
band.
•
Make sure that while cutting the band, you still
continue to move the machine forward.
Gluing the band on thick edges
•
When you need to glue the band on work piece
with thick edges, remove one of the guiding
rails.
Gluing the band on edges with various
planes
•
The machine setting and working process is
the same as when working with work piece
with edges in one level/plane.
•
Remove the side guiding rail.
•
Turn the auxiliary pulley.
