Unimax MA-2025, Руководство пользователя

Страница: 74 / 75

74
Troubleshooting
If these solutions do not work then please contact Maxon customer support.
Hardware Issues
Power LED does not work.
§
Please check if the power adapter is OK.
§
Please check that power adapter supports between 9 ~ 30 [VDC].
Link LED on RJ45 port does not work.
§
Please check whether the Ethernet cable is inserted correctly or not. Also check
the PC’s LAN card.
§
Please check whether the Ethernet cable is direct or cross. Ethernet cable must
be a direct cable.
§
If you are connecting to a cross HUB then you should use the cross over
cable.
Link LED on RJ-45 port is always green but does not connect on Internet.
§
In this case, the connected PC’s LAN card supports only 10Mbps but PC OS
(Operating System) is set to 100Mbps. Please change the PC environment to
support 10Mbps.
Software Issues
I need to set a static IP address on a PC.
§
By default, assigns IP addresses from a range of 192.168.0.50 to
192.168.0.100 using the DHCP server. To set a static IP address on a PC, you can
use an IP from the DHCP range of which is not used by any other
device on the network. Also you need to assign the IP as the default
gateway on that PC. Each PC or network device that uses TCP/IP must have a
unique address to identify itself in the network. If the IP address is not unique to a
network, Windows will generate “IP conflict error" message.