Cordless Framing Nailer
E&OE
© 2017 Unimac
1
Safety
WARNING!
ENSURE THAT NO PART OF ANY HUMAN, ANIMAL OR CLOTHING IS PLACED IN/NEAR THE
AREA WHERE NAILS ARE FIRED OUT OF THE GUN, REGARDLESS OF WHETHER YOU THINK THE GUN IS
EMPTY OR LOADED WITH NAILS.
•
KEEP CHILDREN AWAY.
All children should be kept away from the work area. Don’t let them handle the
tool.
•
USE SAFETY GLASS AND EAR PROTECTION:
Air tool operators and others in work area should always
wear safety glass to prevent the injury from fasteners and flying debris when loading and unloading this tool.
Maybe the noise would harm your hearing, wear the ear protection to safeguard. (See fig 1.)
•
NEVER USE OXYGEN, COMBUSTIBLE OR ANY OTHER BOTTLE GAS
as a power source or would
cause explosion and serious personal injury. (See fig 2.)
•
DO NOT CONNECT TOOL TO COMPRESSED AIR
which pressure exceeds 120psi.
•
DO NOT PLACE OVER-LONG AIR HOSE
in working area in case of the operator’s unexpected tripping.
Make sure all connections are
tight
•
CARRING TOOL ONLY BY THE HANDLE
do not keep the trigger pull on safety
yoke mechanism to avoid
unintentional firing of fastener.
•
KEEP THE TOOL POINTED AWAY FROM YOURSELF
and others at all time and keep hands, any body
parts away rear area to Safety guard against possible injury.
•
DISCONNECT
TOOL FROM AIR SUPPLY BEFORE LOADING
fasteners to prevent a fastener from being
fired during connection. (See fig3.)
•
DO NOT KEEP THE TRIGGER OR SAFETY DEPRESSED
during loading fasteners or the unintentional
firing of a fastener would cause personal injury
•
DISCONNECT TOOL FROM AIR SUPPLY HOSE
and close the compressor before performing
maintenance, alter the accessories or during non-operation.
•
DO NOT DRIVE FASTENER ON SCAFFOLDINGS, LADDERS
and on such similarly construction, not
working on airtight case, and vehicles.
•
DO NOT DRIVE FASTENERS CLOSE TO THE EDGE OF THE WORK PIECE.
The workpiece would split
allowing fastener to fly free or ricochet causing personal injury.
•
DO NOT DRIVE FASTENER ON TOP OF NAILED FASTENER,
or the fastener can ricochet causing
personal injury.
•
NEVER USE A TOOL
that is leaking air, had missing or damaged parts or requires repair and make sure all
the screws and securely tightened.
•
MAKE DAILY INSPECTION FOR FREE MOVEMENT
of trigger, safety mechanism and spring to insure the
tool can operate well.
•
ONLY USE PARTS AND ACCESSORIES
recommend by manufacturer.
