Unimac NAL-FLOOR, Руководство пользователя

Страница: 10 / 13

100psi Pneumatic 2 in 1 Nailer
E&OE © 2017 Unimac 9
Problems Causes Possible Solutions

Damaged fasteners.
 Magazine or nose screws loose.

Magazine is dirty.

Pusher spring damaged.
 Driver is worn or damaged.

Replace with undamaged
fasteners.

Tighten screws.

Clean magazine.
 Replace spring.

Install “DRIVER” Maintenance
Kit.
Other problems

Contact your local service
centre.
In the Box
When unpacking, check to make sure that all the parts are included. If any parts are missing or broken, please
contact the seller.
1X
2 in 1 UNIMAC Nailer/Stapler
1X
S3 Hex Key
1X
S4 Hex Key
1X
S5 Hex Key
1X
Wrench
1X
Mallet
1X
Base plate
1X
Air tool oil