Pneumatic Air Coil Nailer
E&OE
© 2017 Unimac
1
Important Safety Instructions
Ensure that no part of any human, animal or clothing is placed in/near the area where
nails are fired out of the gun, regardless of whether you think the gun is empty or loaded
with nails.
Please make certain that the person who is to use this equipment carefully reads and
understands these instructions before starting operations.
WARNING
: When using pneumatic tools, basic safety precautions should always be followed to reduce the risk of
personal injury, including the following:
Read and follow all instructions.
There are certain applications for which this tool was designed. We strongly recommend that this tool SHOULD
NOT be modified and/or used for any application other than for which it was designed. If you have any questions
relative to its application, please contact your local seller.
1.
KEEP WORKING AREA CLEAN
.
Cluttered areas invite injuries.
2.
DON’T ALLOW CHILDREN IN THE WORKING AREA.
Do not let them handle the tool.
3.
Use safety glasses.
To prevent eye injuries, the tool operator and all persons in/near
the working area must wear safety glasses with permanently
attached, rigid, plastic side shields. These safety glasses must
conform to ANSI Z87.1 requirements (approved glasses have “Z87”
printed or stamped on them.)
4.
Use ear protection.
The working area may be exposed to high noise levels that can
lead to hearing damage.
5.
Dress safely.
Protective gloves and non-skid footwear or safety shoes are
recommended when working with and operating this tool. Don't
wear loose clothing or jewellery. They can get caught in moving
parts. Also, wear a protective hair covering to prevent long hair
from getting caught in the tool.
6.
Use only clean, dry and regulated
compressed air at 70 to
120 PSI (5 to 8.3 BAR).
7.
Never use oxygen, carbon dioxide
, combustible gases or any
other bottled gas as a power source for this tool.
8.
Do not connect the tool
to pressure levels that potentially
exceed 180 PSI (12.3 BAR).
9.
Use only an air hose that is rated
for 150% of the
maximum system pressure. Please try to use a hose of ID 3/8”
connecting nailer with compressor.
