EN
- 11 -
Installation Method
Connect the external pipelines as follows:
Gooseneck faucet
To purified water outlet
To other faucets
Pressure relief valve
To water
inlet
Power
adapter
To rejected water outlet
(sewer drainage)
Three-way ball valve
Main inlet valve (cold
water angle valve)
Water-leakage alarm indicator
(The picture is for reference only, and the real product shall prevail)
1. Debugging method
1.1 After the installation of the purifier, open the three-way ball valve and turn on the power supply after checking there is no water leakage in the
connections between the purifier and others;
1.2 Turn on the faucet and flush the RO membrane filter; and please follow the following steps so as to achieve the maximum purification effect of
the RO membrane filter:
1) Turn on the faucet to keep normal water purification for 2 hours.
2) Turn off the faucet to leave the purifier standing for 24 hours.
3) Turn on the faucet, the purified water can be drunk directly after 2 hours of normal purification.
Notice:
The device will start self-protection program every 30 minutes' continuous working, at this time, please power off the device by unplug the power
supply, then re-power on the power supply, the device can work normally, if any other problems, please contact your local Pureit dealer.
