R04365/125083 Retro Basic PSU
NFU 960
R04366/125081 Retro Ranger PSU
R04367/125082 Retro Regulated PSU
Introduction
These three “retro” power supplies are intended for general laboratory use and have some
features in common with the original UNILAB power supplies:
All have a locking mechanism, that can limit or preset the voltage available to
students in specific experiments.
All have 4mm output socket/terminals, for connection of bare wires as necessary
All have a thermal “trip”, which can be reset shortly after removal of the excess
load.
All are robustly made, with captive mains lead and integral cable wraps on the back
panel.
All are protected by a time delay mains fuse in the front panel.
Retro Basic
Retro Regulated
Retro Ranger
