Unika Stage Series, Руководство пользователя

Страница: 4 / 12

UNiKA ISO-2 User Guide
3
AUDIO CONNECTION
Before connection:
As with all audio gear, always ensure audio system levels are turned down
or equipment turned off before making connections. This will avoid plug-
in or turn-on transients from damaging more sensitive components such as
tweeters.
Connect ISO-2 to system:
The ISO-2 has two combination XLR/TRS input connectors, wired to the
AES standard pin-1 ground, pin-2 hot (+), pin-3 cold (-).
Balanced or unbalanced output signal can be connected to the input of ISO-
2; the isolated outputs will always be balanced signals.
The balanced output of the ISO-2 is line level, meaning that it should be
connected to the line input of a mixing console.
Suggestions about distance cable running:
Unbalanced cables are much more susceptible to noise than their balanced
counterparts, keeping unbalanced cables under 8 meters (25’) in length is
good practice while balanced cables can easily extend to 100 meters (300’).