4
UNiKA
PRO BT5
User Manual
The output side is equipped with a TYPE C USB
terminal, and an external switching power supply or
mobile power supply can be used to provide 5VDC
voltage to make the Bluetooth module work normally.
Note:
Since the device does not include charging
identification IC, some of power bank with QC function
may not be available or may stop supplying power
halfway because the IC is not detected. On the other
hand, the power bank with automatic stand by mode is
not recommended.
POWERED TERMINAL
POWERED INDICATOR
After the power supply is connected correctly, the
"POWER ACTIVE" indicator on the surface will light up.
The built-in channel independent balanced isolation
transformer has solved the potential difference leakage
problem. When the system causes a ground loop due
to poor wiring, the noise can be eliminated through the
GND/LIFT button.The GND/LIFT button determines
whether pin 1 of the output XLR is grounded, grounded
when it bounces, and disconnected from ground when
pressed.
ELIMINATING
GROUND LOOP NOISE
Equipped with a mini TRS headphone output jack and
a monitoring volume knob at the bottom and right of
TYPE-C, 16Ω~300Ω headphones can be inserted for
advance and real-time monitoring. The volume knob
does not affect the level of the balanced output at the
back of the isolation transformer.
MONITOR
After the power supply is connected, the Bluetooth
synchronization indicator light will continue to flash.
Please turn on the Bluetooth of your mobile device and
search for “UNiKA BT-5” and join the synchronization. If
the synchronization is successful, the synchronization
indicator light will remain on and no longer flash.
BLUETOOTH
SYNCHRONIZATION METHOD
