Unika GEQ-215, Руководство по эксплуатации

Страница: 2 / 4

INTRODUCTION
We congratulate you on choosing a Sound Product
equalizer. You will find that it has been designed for
easy use. The latest advances in audio technology
have been utilized in the design of making this
equalizer the ideal brain of any audio system. We have
incorporated many features to help you, fifteen x 2 band
of tone effects controls, in/out passing switch, low-cut
switch control and level control. Whether you're looking
to custom tailor that mix or optimize the acoustics of a
really tough room. Please read all instructions carefully
before operating.
GRAPHIC EQUALIZER
1
GEQ-215 / GEQ-215F
WARNINGS
1. All operating instructions should be read before using
this equipment.
2. To prevent the risk of electrical shock, Do not remove
cover or bank no user-serviceable parts inside refer
servicing to a qualified service technician.
3. Do not expose to birect sunlight or heat source. Such
as radiators. stoves, stoves, or other appliances that
produce heat.
4. This unit should be cleaned only with a damp cloth,
audio solvents or other cleaning detergents.
5. When moving this equipment it should be placed in
its original carton and packing. This will reduce the
risk of damage in transit.
INSTRUCTIONS FOR CONNECTIONS
1. Be sure that the power (1) is in the off position. All
connections must be made with the equipment off.
2. Before plugging in the power cord (8) make sure the
voltage selector switch (7) is set to the correct
voltage. (The unit is preset to 110 volts). Insert the
power cord into the proper source.
3. For best sound use only high quality audio cables
when hooking up this equalizer. Make sure that all
cables are pushed in securely.
4. Make sure you correctly attach the patch cables for
the input source and output signal.
OPERATING INSTRUCTIONS
3. Graphic Equalizer (3) : These sliders allow adjustment up
to 12 dB each octaves from 31.5 Hz to 16 kHz (31 Band)
or 20 Hz to 20 kHz (Dual 15 Band). These equalizer
controls are provided for improving frequency response
of your system, compensating for room environment
effect.
4. Level adjustment control (6) : You can obtain a proper
output signal level using this level control. The Level
Display LEDS (4) : will indicate you the exact output
levels from -10 dB to +18 dB in 4 steps. When the +18 dB
LED lights up. It tell you that there is too much output
power calibrated to produced distortion, lower the level
control gradually until this LED goes off.
5. Low Cut Switch (5): The low-cut switch attenuates the
muddy and unwanted sound created by your source
equipment, especially from record players.
GEQ-215

Dual 15 band, 2/3 Octave from 20Hz ~ 20kHz

+12 / -12 dB boost / cut range on

20mm slide controls 20Hz ~20kHz frequency response,
+/- 0.5dB

Low cut filter 60Hz - 3dB

XLR, TRS balance input

XLR, TRS Balance output

Signal level at - 10dB, 0dB, +10dB, +18dB LEDs
indicators

Low cut, & bypass function w/LEDs indicators

AC 120V/240V switchable

1U rack space
GEQ-215F

Dual 15 band, 2/3 Octave from 20Hz ~ 20kHz

+12 / -12 dB boost / cut range on

45mm slide controls 20Hz ~20kHz frequency response,
+/- 0.5dB

Low cut filter 60Hz - 3dB

XLR, TRS balance input

XLR, TRS Balance output

FDC Feedback Detection Circuit With 30 LEDs indicators

Signal level at - 10dB, 0dB, +10dB, +18dB LEDs
indicators

Low cut, & bypass function w/LEDs indicators

AC 120V/240V switchable

2U rack space
1. Power On: Once you have made all connections to
your equalizer, Press the Power (1) button. The
equalizer is on. Press again to turn the power off.
2. IN/OUT Passing Switch (2) : Press this switch in. The
equalizer will be activated. Press it again to out, The
signal will be passed.