Unika DSP-428II, Быстрый старт, Страница: 6 / 8

5
DSP-428II Basic-Quick Start Manual
The output level indicator and mute button/indicator of OUT 1-8 channels
3
• Actual level at L0dB position is 2Vrms
• When the LIMITER limiter is activated, the LIMIT light will always be on or flash.
• When the signal is overloaded, the CLIP light will be always on or flashing. Please reduce the audio source
signal level.
• After mute control of any channel 1-8, whether it is manually pressed or through the control software, the red
indicator light on the right side will light up.
Lock Button
4
When the PRESET 6 button is pressed for 3 seconds, the MUTE indicators of the OUT 1-8 channels will flash
once. From then on, the PRESET 1-6 buttons and the OUT 1-8 MUTE buttons will be locked. This is for use The
default mechanism was tampered with during the period. To unlock, just press the PRESET6 button for another
3 seconds. The MUTE indicator light of OUT 1-8 flashes once to unlock.