background image

10

11

back to the Manufacturer within 10 days of the purchase date with all its parts filled in.

The  purchaser  has  sole  right  to  the  replacement  of  the  parts  that  are  deemed  faulty  by  the 

Manufacturer, or by his authorised representative, as regards their material or manufacture. This 

does not imply any right to compensation for any type of direct or indirect damage. Any costs for 

labour, packing and transportation are at the purchaser’s expense.

Should the product be sent to the Manufacturer for repairs under this guarantee, on arrival it must 

be complete with all its original parts and not be tampered with. Any request under this guarantee 

will be refused if this is not the case.

All replaced parts become the property of the Manufacturer.

Any faults or failures which occur during or after the period of the guarantee do not imply the 

right to suspend payment or to any further extension.

This guarantee does not cover the replacement of the appliance and automatically becomes void 

should the agreed terms of payment not be abided by.

The following are not covered by the guarantee:

• 

direct or indirect damage, of any type, caused by falls, incorrect use of the appliance and 

failure  to  observe  regulations  regarding  safety,  installation,  operation  and  maintenance 

which are contained in these instructions and the instructions for the combustion engine, if 

any, used with the appliance;

• 

damages due to the inactivity of the appliance for repairs;

• 

any parts which are subject to wear during normal use;

• 

any parts which are deemed faulty due to negligence or carelessness during use;

• 

damage caused by the use of non-original spare parts or accessories or any not expressly 

authorised by the Manufacturer, and by repairs not carried out by a 

Skilled Technician

• 

damage caused by incorrect electrical power supply or the use of unsuitable fuel.

The guarantee becomes void should the appliance be tampered with, especially its safety and 

maximum pressure limiting devices, and the Manufacturer will no longer be held liable.

The  Manufacturer  reserves  the  right  to  make  any  modification  at  any  time  which  it  deems 

necessary  to  improve  the  product  and  is  not  liable  to  make  these  modifications  to  previously 

manufactured products, be they delivered or under delivery.

The conditions in this section exclude any previous explicit or implicit condition.

1.2 THE ADDRESS OF THE MANUFACTURER

The address of the Manufacturer of this appliance is given in the 

Declaration of Conformity,

 

and at the end of this instruction manual.

1.3 USE AND CONSERVATION OF THESE OPERATING AND 

MAINTENANCE INSTRUCTIONS

     

 CAUTION

•  These operating and maintenance instructions must be used in conjunction with those for 

the combustion engine, if any, which is used with the appliance. 

The latter, which is taken 

as copied in full in this booklet, must always be kept with the appliance and read carefully 

in addition to these instructions.

The operating and maintenance instructions are an integral part of the appliance and they must 

be kept in a safe place for future reference so that they may be readily consulted in case of need.

The operating and maintenance instructions contain important information for the safety of the 

operator and of any people near him and for the protection of the environment.

In case of deterioration or loss, a new copy should be requested from the dealer or from an 

authorised service centre.

If the appliance is passed on to a third party, please make sure these operating and maintenance 

Содержание CR 125P





























Отзывы: