Unigas R91A, Руководство по установке, использованию и обслуживанию

Страница: 10 / 55

C.I.B. UNIGAS
- M039231CB
10
Performance Curves
To get the input in kcal/h, multiply value in kW by 860.
Data are referred to standard conditions: atmospheric pressure at 1013mbar, ambient temperature at 15°C
NOTE: The performance curve is a diagram that represents the burner performance in the type approval phase or in the laboratory
tests, but does not represent the regulation range of the machine. On this diagram the maximum output point is usually reached by adj-
suting the combustion head to its “MAX” position (see paragraph “Adjusting the combustion head”); the minimum output point is rea-
ched setting the combustion head to its “MIN” position. During the first ignition, the combustion head is set in order to find a
compromise between the burner output and the generator specifications, that is why the minimum output may be different from the Per-
formance curve minimum.
Pressure in the Network / gas flow rate curves
PRESSURE IN
COMBUSTION CHAMBER
(mbar
) R91A
kW
R92A
kW
PRESSURE IN
COMBUSTION CHAMBER
(mbar)
R93A
kW
GAS PRESSURE (mbar)
R91A
Stm
3
/h
R92A
Stm
3
/h
GAS PRESSURE (mbar)
R93A
Stm
3
/h
Caution: the gas rate value is quoted on the x-axis, the related network pressure is quoted on the y-axis (pressure value in
the combustion chamber is not included). To know the minimum pressure at the gas train inlet, necessary to get the reque-
sted gas rate, add the pressure value in the combustion chamber to the value read on the y-axis.
0
2
4
6
8
10
12
14
16
400 800 1200 1600 2000 2400 2800
0
2
4
6
8
10
12
14
16
400 800 1200 1600 2000 2400 2800 3200 3600
0
2
4
6
8
10
12
14
16
500 1500 2500 3500 4500
0
10
20
30
40
50
60
70
80
90
50 100 150 200 250 300
Rp 2" (50)
DN65
DN80
DN100
0
20
40
60
80
100
120
50 100 150 200 250 300 350
Rp 2" (50)
DN100
DN80
DN65
0
40
80
120
160
200
50 100 150 200 250 300 350 400 450 500
Rp 2" (50)
DN65
DN80
DN100