Unigas P60 VS, Руководство по установке, использованию и обслуживанию

Страница: 52 / 132

8
ACCESS TO SERVICE LEVELS BY PASSWORD
1 From the main page
enter the main menu by pressing the ESC key twice: the display will show
2 by means of the arrow keys, select “Params&Display”, press ENTER: the system will ask you to enter the proper
password, if it has not been entered yet:
3 by means of the arrow keys, select “AccessService” (service level), confirm by pressing ENTER.
4 insert the Service Level password that is “9876” (defualt value);
.
5 To insert a character (number or letter) press the arrow keys until the desired character is reached, then press ENTER to confirm
and get the next character (the character entered will not be displayed once confirmed by ENTER).
6 Repeat the procedure until the password is completed
7 Confirm the password by pressing ENTER again
8 The display will show
The access to the 6 menues of the “Service” level is gained.
Attention: the display shows 4 rows at a time, to scroll all the rows use keys . To enter the submenu/parameter shown on the
row press “ Enter “ , to go back press “Esc” .
To go back to the main menu, press “Esc” until the first level menu is reached, then press the “right arrow” , until
the first item is reached, then press “ Enter “ twice
.
Password Logout
To avoid customer changes on parameter settings and consequently changes in regulation, the password must be logged out. The
Setpoint 80°C
Act.value 78°C
Standby 12
OperationalStat
Operation
ManualOperation
Params & Display.
Access w-out PW
Access Serv
Accesso con OEMAccess
OEM
Accesso con LSAccess LS
BurnerControl
RatioControl
O2Contr/Guard
LoadController
**************************************