32
Setting the handset
Switching advisory tones on/off
The handset notifies acoustically about different activities and statuses. These advisory tones can be
switched on/off independently of each other.
Auto answer
When Auto answer is enabled, the handset accepts an incoming call as soon as it is removed from the
charging cradle.
Regardless of the
Auto Answer
setting, the connection ends as soon as you place the handset back in the
charging cradle. Exception: Press and hold the handsfree key
for a further 2 seconds while placing the
handset in the charging cradle.
Fast access to numbers and functions
Assigning a number to digit keys (quick dial)
It is possible to assign a
number from the directory
to the keys
and
to
.
¤
Press and
hold
the digit key
or
¤
Briefly
press the digit key Press the display key
QuickDial
The directory opens.
¤
. . . use
to select an entry
OK
. . . use
to select a number if necessary
OK
. . . the entry is
saved to the digit key
Dialling a number
¤
Press and
hold
the digit key . . . the number is dialled immediately
or
¤
Briefly
press the digit key . . . the number/name (possibly in abbreviated form) is shown on the left
display key
. . . press the display key . . . the number is dialled
Changing the digit key assignment
¤
Briefly
press the digit key
Change
. . . the directory is opened . . . possible options:
¤
. . . use
to select
Audio Settings
OK
Advisory Tones
OK
. . . then
Tone when keys are pressed:
¤
Key Tones:
. . . use
to select
On
or
Off
Confirmation/error tone after making entries, advisory tone when a new message has been
received:
¤
Confirmation
. . . use
to select
On
or
Off
Warning tone when there are fewer than 10 minutes of talktime remaining
(every 60 seconds):
¤
Battery
. . . use
to select
On
or
Off
Warning tone when the handset is moved out of range of the base station:
¤
Out of Range:
. . . use
to select
On
or
Off
Save settings:
¤
Save
¤
. . . use
to select
Settings
OK
Telephony
OK
Auto Answer
Change
(
= activated)
A number has not been assigned to the digit key.
If the entry in the directory is deleted later, this will not affect the assignment of the
digit key.
Change the assignment:
¤
. . . use
to select an entry
OK
. . . select a number if
required
OK
Delete the assignment:
¤
Clear Key