Basic functions
23
Accepting a call via the loudspeaker
(speakerphone mode)
Suggestions for using speakerphone mode:
• Tell the other party that you are using speakerphone mode.
• The speakerphone works best at a low receiving volume.
• The ideal distance between the user and the telephone in speakerphone mode
is about 50 cm (approx. 20 inches).
The phone rings. The caller appears on the screen
1
.
Speaker
Press the key shown. The LED lights up.
if nec.
Vol.+
or
Vol.-
Raise
or
lower the volume. Keep pressing the key until the desired volume is set.
Accepting a call via the headset
Prerequisite:
A headset is connected.
The phone rings. The
Headset
key flashes.
Headset
Press the key shown.
if nec.
Vol.+
or
Vol.-
Adjust the call volume.
Switching to speakerphone mode
Prerequisite:
You are conducting a call via the handset.
Speaker
\
Hold down the key and replace the handset. Then release the key and continue
the call.
if nec.
Vol.+
or
Vol.-
Adjust the call volume. Keep pressing the key until the desired volume is set.
U.S. mode
If the country setting is set to U.S. (consult your administrator), you do not have
to hold down the loudspeaker key when replacing the handset to switch to
speakerphone mode.
Speaker
Press the key shown.
]
Replace the handset. Proceed with your call.
if nec.
Vol.+
or
Vol.-
Adjust the call volume. Keep pressing the key until the desired volume is set.
1. Pay attention to the notes on voice encryption
Æ
Page 63.
Make sure your headset port is set up properly
Æ
Page 107.