Unify Gigaset M2 Скачать руководство пользователя

Страница: 9 / 101

Safety notes

Compliance to german BGR 139 (Personal alarm
functionality)

(for Gigaset M2

plus

professional and Gigaset M2 Ex professional only)

Notes:

• For BGR-compliant operation as a personal alarm signal device

with a voice communication capability (PNG-S), the handset

must operate in conjunction with a PNEZ (emergency call cen-

tre). Handset operation without PNEZ is not BGR-compliant.

• The alarm signal function cannot be deactivated by the user. De-

activation is only possible via a PNEZ control call.

• For compliance with BGR 139, the handset may only be config-

ured by specially qualified technicians. The PNG configuration

menu should be PIN-protected to prevent unauthorised config-

uration changes. The PIN should be kept secret.

Attention:

• The pre-alarm volume starts low and gradually rises until it be-

comes very loud. Users should be aware of this.

• The battery pack must always be sufficiently charged for the an-

ticipated length of operation. The battery pack’s charging capac-

ity diminishes over its life. It should therefore be replaced by

specially qualified technicians when capacity levels become in-

sufficient (discharging speeds up over time). If necessary, con-

sult your safety officer.

Содержание Gigaset M2






































































































Результаты поиска

Содержание Gigaset M2

Отзывы:

Похожие инструкции для Gigaset M2

Бренды по названию

Популярные бренды

Unify Gigaset M2, Руководство пользователя

Результаты поиска

Содержание Gigaset M2

Отзывы:

Похожие инструкции для Gigaset M2

Бренды по названию

Популярные бренды