Uniform Industrial UIC802, Руководство пользователя

Страница: 5 / 15

5 of 15
b. The UIC802 detect read error. The UIC802 will display the error code and the
message “Pls Reinsert Card” as the idle prompt.
(II) Magnetic Card and RFID Card Operation
1. Press the POWER key to wake up the UIC802. The UIC802 will beep and displays
the idle prompt:
2. Read the RFID card by taping it against the upper left corner of the reader, where the
RFID antenna locates. The UIC802 will beep once, display the first 32 bytes of the
card data and the message “Saving Data Now Be Patient” briefly. At this point, the
card data has been stored in the internal Flash memory. The display will go back to
the idle prompt.
3. If the card is brought to a distance too far from the antenna and not detected by it, it
will have no response at all. The user has to bring it closer. If it is close enough, the
reader will read the card. However, if the card is bad or reading unsuccessful, it will
beep twice and show the following messages:
4. For this mode of dual card types operation, the user can always read the magnetic card
by inserting it into the slot. The responses will be the same as in the magnetic card only
case, except that the prompts messages are slightly different, to reflect either type of
card reading:
The “Pls Insert Card” will become “Please Read Card”. The “Pls ReInsert
Magnetic Error
Track 1
Pls Reinsert CRD
08-15 12:36 PM
Pls Insert Card
08-15 12:36 PM
Please Read Card
08-15 12:36 P 00%
WILLIAM SMITH 23
4567890123456789
Saving Data Now
Be Patient Please Read Card
08-15 12:37 PM 00%
RFID
Bad Reading
Pls ReRead Card
08-15 12:36 PM