28
Recommended saw blade
Manufacturer:
Dimensions:
Uniforest
1000 x 6,0 x 40 Z 80 W
Other saw blades with the same properties can be used!
Only use saw blade which comply with the standard EN 847-1.
Saw blade protection
In accordance with the standard, the saw blade is protected with wooden inserts.
These inserts are subject to gradual wear and must be replaced as soon as they are excessively
worn.
SAW BLADE SHARPENING
To achieve an optimal sharpness, the saw blades can only be sharpened by experts.
Hard carbide saw blade
Instructions for use of hard carbide saw blades
Circular hard carbide saw blades are characterized by a long blade life. The circular saw blades
are quality machine tools and must always be handled with caution.
Hard carbide points must be protected from breaks due to their special hardness.
Improper storage can damage the blade points. Put the circular saw blade on a foam
rubber or similar material.
Never use to saw nails, metal parts or similar materials potentially present in the wood.
Do not expose the circular saw blade to impacts or shocks.
Before you start the engine, check if the circular saw blade rotates in the right direction
and its idle run is flawless.
Never try to stop the circular saw blade by hand or in any other way, when the blade is
running.
Always saw with caution and at an even pace, avoid quick cutting.
The circular saw blades must be cleaned in regular intervals with a resin removal detergent.
In idle run, the noise level of hard carbide saw blades is lower. During sawing, the noise
level depends on the type of wood which is used.
Warranty claims cannot be made in case of improper handling of the machine. The
warranty does not cover saw blades smeared with resin.
REPLACEMENT OF V-BELT
1.
Instructions for replacing the V-belt
When one V-belt is replaced, you must replace all V-belts.
The V-belts must not be taut during their adjustment. Pushing them by force to the V-belt pulley
may damage and tear the V-belts.
V-belts must be prestressed so that they can be pushed by approximately 8 mm by pressing in
the middle.
Types of V-belts
XPA 1482 QUAD POWER III
Similar models of belts with the same properties can also be used!
