Uniforest 65H, Инструкция по эксплуатации

Страница: 11 / 48

11
Winch controler
We can start pulling, when the winch is on the ground and properly strengthened. Apply
the hand brake on the tractor. If the PTO shaft is engaged and the hydraulic system
requires pressure, we can start pulling. Press the right button on the steering console (pos.
2, figure 8). The wire rope starts winding on the drum. When we release the button, the
winding stops.
If the unwinding of the wire rope does not stop immediately after releasing the button, the
winch is malfunctioning. Immediately stop work and contact service company, because
operating the winch in this case is deadly!
During pulling it is forbidden to lift the winch, because this can damage the connection
PTO shaft on the winch.
In case of ultra vires or danger of accident, immediately press the red button (pos. 3) to
put the winch in a standstill.
The SMART 3in1 function
If your winch is equipped with an unwinding device (Hpro version), it icludes the SMART
3in1/ TERRA function.
It can only be operated using a corresponding remote controller.
When the winch is started for the first time, use the manual console and test its operation.
Operation mode