Owner’s Manual,
Model BC1712E Portable Electric Grill
BC1712E owner’s manual 12
Cleaning and Care
Caution: All cleaning and maintenance should be done when grill is cool. DO NOT clean any grill part
in a self-cleaning oven. The extreme heat will damage the finish.
Cleaning
Burning-off the grill after every use (approx. 15 minutes) will keep excessive food residue from building
up.
Recommended cleaning materials -
Mild dishwashing liquid detergent
Hot water
Nylon cleaning pad
Wire brush
Putty knife/scraper
DO NOT use cleaners that contain acid, mineral spirits or xylene.
Outside surfaces - The porcelain finish of the grill lid has a glass-like composition that should be
handled with care not to chip. Use mild dishwashing detergent or baking soda and hot water solution.
Non abrasive scouring powder can be used on stubborn stains, then rinse with water.
If the inside surface of the grill lid has the appearance of peeling paint, baked on grease buildup has
turned to carbon and is flaking off. Clean thoroughly with strong solution of detergent and hot water.
Rinse with water and allow to completely dry. NEVER USE OVEN CLEANER.
Interior of grill bottom – Remove residue using brush, scraper and/or cleaning pad, then wash
with dishwashing detergent and hot water solution. Rinse with water and let thoroughly dry.
Plastic surfaces – Wash with a soft cloth and dishwashing detergent and hot water solution.
Rinse with water. Do not use abrasive cleaners, degreasers or a concentrated grill cleaner on plastic
parts.
Cooking Grid –Use mild dishwashing detergent and hot water solution. Non abrasive scouring
powder can be used on stubborn stains, then rinse with water.
Heat Plate – Clean residue with wire brush and wash with soapy water, then rinse with water.
Cleaning heeting element assembly -
1. Make sure grill is unplugged from power outlet.
2. Unplug electric controller from heating element.
3. Remove cooking grate
4. Remove heating element by unscrewing the wing nuts securing the heating element at the
connection. There is a lock washer and a flat washer under each wing nut.
5. Lift heating element up and away from side of grill.
6. Clean heating element with mild brush or cloth. Be careful not to damage the heating element
surface. Do not submerse heating element or electric controller in water.
7.
Reinstall heating element and plug electric controller back to heating element. Inspect electric
controller and power cord for any damage. If damaged, Call our customer service for a replacement
controller. This controller is made specifically for this grill.
