Strong echo heard from the person who is
talking to B. Voice user:
During Conversation
,
transfer the call to mobile and listen. If echo disappeared,
please transfer the call again from mobile phone to B. Voice and lower the loud
speaker until echo is eliminated. If the echo is still remains, that means the
echo is generated by the network provider or mobile phone itself. B. Voice is
unable
to
eliminate
.
Loudspeaker volume of B. Voice too low or high and impossible to adjust:
Please adjust the volume directly on the mobile phone as desired, then fine
tune it by the volume control of B. Voice.
The number dialed by mobile phone couldn't be found from B. Voice:
All number which are dialed directly from the mobile are unable to save in
B. Voice, please check it on the mobile phone.
A
ll buttons disabled:
Reset B. Voice by press and hold the reset button for min. 2 seconds. It will
restart again but all data will be lost.
B. Voice
not
functioning
after
auto
-
reconnection
Please
restart
you
mobile
and
connect
again
.
If
the
problem
is
not
solved
,
please
restart
B. Voice
as
well
Some mobile phone models:
Nokia 6103
- after a call has been held and one call closed the held call cannot be
"un-held" from the kit. It has to be actioned on the phone.
Most of Nokia phones call transfer function -
When the car kit transfer a call to mobile, then the mobile will disconnect
Bluetooth. To reconnect, simply press SEND button, hold the SEND button only
for call transfer.
LG KG800
- when the mobile is connected to car kit, it only supports HSP profile,
then some HFP functions are disabled (such as reject incoming call, DTMF,
call transfer). If the car kit is connected to mobile then it can support HFP call
functions, therefore, preferable to use car kit to connect to LG KG800 phone.
Samsung E870, G600
- to transfer calls to/from phone needs confirmation on the
phone
Samsung G600
- this phone does not support call waiting /swapping
How to get the audio back when it lost:
Turn the kit off and on again to get back the audio connection. If the unit is
frozen, press reset switch.
11
4.6 Options during a call
4.6.1 Call Waiting:
**
This is a network service , please
consult your network provider for
details
Accepting incoming call during a conversation
1.
Press
and it will automatically switch to
Line2
2.
To switch between to Lines, press
*
4.6.2 Transfer Call between mobile and B. Voice during conversation
Press and
hold
for two seconds.
5
.
Trouble Shooting
Phone status showing
:
It is depending on the availability and provides by the connected mobile phone
Mobile phone couldn't pair with B. Voice:
1.Please power off and on again B. Voice then repeat the pairing procedures
again.
2.Set off all other Bluetooth devices before start pairing.
3.Either B. Voice and the mobile phone are able to be master or slave to pair
with other Bluetooth device, however pairing will not work if those are being
master or slave at the same time.
Loudspeaker sound level too low
:
Please increase the volume level to maximum on the mobile phone during
conversation.
Voice too low to be heard from the person who talking to B. Voice user
:
Do the following steps while conversation in progress
1.
Adjust the microphone gain to maximum on B. Voice
,
or
2.The person who is
talking to B. Voice user adjust his/her mobile phone
volume
to maximum.
ENGLISH
ENGLISH
4.7 A2DP Music Playback
Please make sure your mobile support A2DP
To Play/Pause, press
To Skip, press
To Previous, press
+
-