Uniden XDECT 8155 Series, Руководство пользователя

Страница: 61 / 68

5
This handset is designed for use with Uniden’s XDECT 8115 and XDECT
8155 bases.
Compatible Bases
REGISTERING TO A BASE
The accessory handset won’t work until you register it to a
compatible Uniden cordless phone!
Installing the Beltclip
Line up the holes on each side of the handset.
To attach the belt clip;
Insert into the holes on each side of the handset.
Press down until it clicks.
To remove the belt clip; Pull either side of the belt clip to release the
tabs from the holes.
Other compatible bases include Uniden’s XDECT6135, SSE35/37 and
DECT31xx series.
Some features may not be available when using the XDECT 8105WP
with these other bases. For the most up-to-date list of which bases this
handset is compatible with, see our website.
Registration Methods
There are two different registration methods, but it’s easy to figure out
which one applies to your handset and base. Answer question to register
the handset to one of the compatible bases.
Yes 1.
On the base, open the menu and select
Register Accy
. The
display should show Registering .
2. On the handset, press and hold HASH(#) until the display says
Handset Registering
(about 2 seconds).
No
Does the base have an LCD display?
1. On the base, press and hold FIND about 5 seconds in
standby mode.
2. On the handset, press and hold
HASH(#)
until the display
says
Handset Registering
(about 2 seconds).
#
After about 30 seconds, the handset display should say Registration
Complete .