Uniden XDECT 8015WP series, Руководство пользователя, Страница: 27 / 36

27
resetting and registering handsets
If you are having trouble with a handset or if you want to replace one,
you need to clear the registration information from the base and the
handset:
Do you have the base the handset is registered to?
Yes No
Press & hold 1.
END
and
#
until the
System Reset menu appears (about 5
seconds).
Select 2. Deregister HS. The display lists
all registered handsets.
Select the handset you want to reset. 3.
When the phone asks you to confirm, 4.
select Yes . The handset clears its
information from the base & deletes it
own link to the base.
Press & hold 1.
END
and
#
until
the System Reset menu
appears (about 5 seconds).
Select 2. Base Unavailable .
When the phone asks you 3.
to confirm, select Yes . The
handset deletes its own link
without contacting the base.
When you reset a handset (or if you buy a new one), that handset
displays a
Handset Not Registered
message. If you see this message
on a handset, you need to register it to a base before you can use it.
Registering a handset
Disconnect the base AC adaptor. 1)
On the base, press and hold 2) fiND while you reconnect the
adaptor.
On the handset, press and hold
3) haSh (#) until the display says
Handset Registering (about 2 seconds).
After about 30 seconds, the handset display should say Registration
complete.
If... Try...
you don't hear a dial tone
-
the display says
-
Registration Failed
Making sure the handset is fully
charged, then start over.
To register a handset to a different base, see the section
"Expanding Your Phone" in the user's guide for the other base.