Uniden XDECT 7055, Руководство пользователя

Страница: 27 / 36

25
If… Try…
The answering
system won't record
messages.
Making sure the
-
Record Time is not set to
Announce Only .
Deleting messages (the memory may be full).
-
A handset can't access
the answering system.
Making sure no other handset is using the system.
-
Making sure the phone is in standby.
-
My outgoing message
is gone.
Seeing if there was a power failure. You may have to
-
re-record your personal outgoing message.
I can’t hear the base
speaker.
Making sure call screening is turned on.
-
Changing the base speaker volume.
-
Messages are
incomplete.
The incoming messages may be too long. Remind
-
callers to leave a brief message.
Deleting messages (the memory may be full).
-
The system keeps
recording if I answer
on an extension.
You may have to change the line mode. Visit the
-
website for more information.
I can't register a
handset.
Seeing if you already have 6 handsets registered to
-
this base.
Resetting the handset.
-
Weak or hard To hear Audio
If a caller’s voice sounds weak or soft, the signal might be blocked by
large metal objects or walls; you might also be too far from the base,
or the handset’s battery may be weak.
Try moving around while you’re on a call or moving closer to the 
base to see if the sound gets louder.
Make sure the handset’s battery is fully charged.

Try adjusting the earpiece volume or the audio tone (see below1.

Adjust the audio tone
During a call, open the menu and select Audio Tone . Choose one of
the three audio tone options: High Tone , Natural Tone (recommended
for hearing aid users1, or Low Tone . You may have to experiment to
figure out which audio tone works best for you.