Dialing a Stored Number
To dial a number previously stored in memory, follow these steps:
HANDSET
BASE UNIT
Remove the Handset from the
Base Unit.
Press
speaker
The speaker LED lights.
Press
A
Press
M
Press
M
Press the memory location number
(0-9) you want dialed.
Press the memory location number
(0-9) you want dialed.
Chain Dialing
On certain occasions, after dialing a number, you may be requested by the
party or service you are calling to enter a special access code, such as when
performing a banking transaction. To do this, simply:
1.
Store the access code into one of the memory numbers.
2.
Dial the main number.
3.
At the appropriate time, press
M
followed by the memory location
number where the access code is saved.
Erasing a Stored Number
To erase a number previously stored in a memory location, follow these
steps:
HANDSET
BASE UNIT
Remove the Handset from the
Base Unit.
Press
M
twice
.
Press
M
twice
.
Press the memory location number
(0-9).
Press the memory location number
(0-9).
Note:
An error tone will sound and the erase procedure will be canceled if
more than 20 seconds elapse between each keystroke entry or
step.
41
