Using your
XC3545
The
XC3545
has dual keypads: one in the Handset, and one on the Base
Unit. This is like having two phones because most operations can be
performed using either the Handset or the Base Units.
Making and Receiving Calls
The following features of your
XC3545
phone are different depending on
the Handset’s location when you make or receive a call.
HANDSET
BASE UNIT
ON BASE UNIT
OFF BASE UNIT
ANSWER
CALL
Pick up Handset
(AutoTalk)
Press
T
1) Press
K
The speaker
LED lights.
2) Talk into the
microphone.
Note: A call
causes the
IN USE
LED to
blink.
MAKE
CALL
1) Pick up
Handset
2) Press
T
3) Listen for dial
tone
4) Dial number
1) Press
T
2) Listen for dial
tone
3) Dial number
1) Press
K
2) Listen for dial
tone
3) Dial number
HANG
UP
Press
T
—
OR
—
Return Handset to Base
(AutoStandby)
Press
K
The speaker LED
goes off.
REDIAL
1) Pick up
Handset
2) Press
T
3) Listen for dial
tone
4) Press
R
1) Press
T
2) Listen for dial
tone
3) Press
R
1) Press
K
The speaker
LED lights.
2) Listen for dial
tone
3) Press
R
Note:
Sometimes when you press
T
to hang up the phone, you may get
an error tone and the phone will not disconnect. If this happens,
place the Handset on the Base Unit or press
T
again while
holding the Handset close to the Base Unit.
32
