6
7
Installing the Phone
Activate the Handset
The handset is powered by a rechargeable battery pack already installed in the handset’s battery compartment.
Note: Use only the Uniden BT-1008 rechargeable battery pack supplied with your cordless telephone.
Connecting the AC Adapter
To the base
To avoid risk of fire and shock, only use the Uniden PS-0012 AC adapter with the base.
Connect the AC adapter to the
DC IN 6V
jack on the bottom
of the base.
Don’t put any power cord where it
people might trip over it or step on it.
If a power cord becomes chafed or
worn out, it can create a fire or
electrical hazard.
Connect the AC adapter
to a standard 120V AC
wall outlet.
Before charging the battery for
the first time, push the activation
pin, located on the bottom of
the handset
(see label with instructions).
Once you activate the handset,
remove the label.
Before charging the battery for
the first time, push the activation
pin, located on the bottom of
the handset
(see label with instructions).
Once you activate the handset,
remove the label.
UC538BH(WXI2077) book OM.indb 7
5/7/2008 6:02:12 PM