Uniden WDSS 5335 Series, Руководство пользователя

Страница: 51 / 72

50
Operating the Answering System While You Are Away from Home
You can access your answering system while you are away from home to check, play, and delete messages, or even
record a new greeting message or turn your answering system on and off.
Note:
The answering machine will only playback messages for four minutes and then it returns to the command waiting
mode. To continue playing your messages, press [#] then [2] again within 5 seconds.
If you enter an incorrect security code three times, you will hear a beep and the answering machine will return to
standby.
To operate from a remote location, use any touch-tone telephone, and follow these steps:
Call your telephone number and wait for the system to answer. If the answering system is off, it will answer after
about 5 rings and sounds a series of beeps.
During the greeting or the beeps (if answering system is off), press
[#] and enter your security code/PIN within
two seconds (see Setting a Security Code or Personal Identification Number (PIN) on page 46).
The answering system announces the current time and the number of messages stored in memory.
You hear “To play incoming messages, press pound-two. For help, press pound-zero” followed by a beep.
Pressing hash [#] is the same as pressing the pound key.
Enter a remote command from the chart below. You have 15 seconds to enter the first command; after the first
command, you have two seconds to enter each command.
•
•
)
2)
3)
4)