E-39
Uniden UM725 Radio Owner’s Manual
TO SET UP A ROUTE:
1. Press the
MENU
button, and then use the
PUSH/SEL
knob to access the
WAYPOINT SETUP
menu.
2. Use the
PUSH/SEL
knob to select
ROUTING METHOD
and
press
SELECT
. If set to
AUTO
, the screen automatically
changes to the next destination. If set to
MANUAL
,
navigation will not start until you press
NEXT
.
3. Select
ROUTE DIRECTORY
and press
SELECT
. The Route
Directory screen displays a list of available routes.
4. Use the
PUSH/SEL
knob to select a route and press
EDIT
.
NAME
and
LIST
appear on the screen.
5. Use the
PUSH/SEL
knob to select
NAME
and press
SELECT
. The pop-up keyboard appears.
6. Enter a name for the waypoint. When done, press
FINISH
.
NAME
and
LIST
appear on the screen again.
7. Select
LIST
and press
SELECT
, The Rout List screen
appears.
8. Press the
ADD
soft key. The Point List screen appears with
a list of saved waypoints.
9. To add a waypoint, use the
PUSH/SEL
knob to select the
waypoint and press
ADD
.
10. Repeat step 8-9 for each waypoint you want to add to the
route.
11. Press
BACK
to exit.
Note: The Waypoint selected for the 01 position will be the first point to which your radio will
navigate. When you reach that waypoint, the radio will navigate to the next waypoint
(02), and continue through the list of waypoints.
Note: These settings cannot be set or changed during navigation. To make any changes, first exit
navigation mode.
UM725GBT
UM725GBT
UM725GBT
UM725GBT
