Uniden UM435, Руководство пользователя

Страница: 16 / 56

In scan mode, you can get the following information from the display (some indicators will
not always be displayed).
Using the radio in scan mode
x You cannot transmit while in scan mode.
x
You must have two or more channels in memory to start a scan.
x To save a channel into memory, select the channel, then press and hold
WX-MEM
for
two seconds. Memory will show on the display.
x To remove a channel from memory, set the radio to that channel, then press and hold
WX-MEM
for two seconds. Memory will no longer show on the display.
x To activate scan mode, press and hold
CLR-SCAN
. Press and hold
CLR-SCAN
again to
return to the previous mode.
x
When the radio automatically stops on a channel, press
CHANNEL UP
to leave that
channel and resume scanning.
x
To end the scan, press the microphone’s
PUSH TO TALK
,
CALL-MEM
, or
WX-MEM
buttons. The radio remains on the last scanned channel.
Scan mode with Weather Alert Watch
If you activate Weather Alert Watch while operating in scan mode, the radio checks the
most recently-used weather channel every seven seconds, then continues scanning the
next channel in memory.
To turn Weather Alert Watch on or off, press and hold
CALL-MENU
while the radio is idle.
Select
Setup
and then
WX-Alert Mode
. Use
CHANNEL UP
and
CHANNEL DOWN
to choose
WX
Alert Mode
setting
ON
or
OFF
.
8