15
UNIDEN UH950S
Handheld UHF-CB Transceiver
Operation
Transmit Power Select
The UH950S has two transmit
power levels: Hi: 5.0 Watt and Lo: 1.0 Watt.
To change your transmit power level:
1. Press
[MENU/MEM]
.
2. Press
or to change the
setting to
Hi
or
Lo
.
3. Press & hold
[MENU/MEM]
to save and
exit.
Boost Feature
Use the Boost feature by pressing
(BOOST)
instead of
(PTT)
to transmit
at maximum transmit power (5W) regardless of the transmit hi/lo setting.
NOTE
Transmitting on a higher level will use more Battery power but
will enable you to transmit further.
Scanning
Press and hold the
[SCAN| OS/GS/MS]
key.
There are 3 scanning modes;
Open Scan (OS),
Group Scan (GS) and
Master Scan (M.SCN) (a special case of Group Scan).
During SCAN the UH950S only checks channels or frequencies that are
in the SCAN Memory, which are indicated by the M (memory) icon. The
UH950S maintains two SCAN Memories; one for Open Scan (OS) mode
and the other for Group Scan (GS) mode, to give you flexibility and allow
you to use the radio more effectively.
NOTE
Group Scan and Master Scan modes share the same SCAN
Memory.
TX Power Low
TX Power High
