4. Turn the rotary knob or press
/
to select desired CTCSS code 01 - 38 or
DCS code 01 - 104
CTCSS:
DCS:
5. Press
to store the setting.
6. Press and hold
to save & exit the menu mode.
Open Scan (OS) Mode
All UHF-CB, user-programmed extra RX channels, Police and Fire & Ambulance
frequencies have been added to the OS SCAN Memory for convenience. To add/remove
channels from OS SCAN Memory, refer to page 23.
Allows continuous scanning of all selected channels. If an active channel is found, scanning
will stop on that channel. If the received signal ceases, the unit will wait 2 seconds for the
signal to return, otherwise scanning resumes.
After transmission in scan mode, the unit will wait 20 seconds for the signal to return,
otherwise scanning resumes.
To select OS Scan Mode:
1. Press
9 times. The SCAN setting flashes.
2. Turn the rotary knob or press
/
on the microphone till OPEN flashes and
press
to save scan type setting.
3. Press and hold
to save and exit from the Menu mode.
Operation
25
UNIDEN UH9000
UHF CB Transceiver
