background image

31

Warranty

UNIDEN UH8060NB

UHF CB Transceiver

Statement of Remedy: 

If the Product is found not to conform to this warranty 

as stated above, the Warrantor, at its discretion, will either repair the defect or 

replace the Product without any charge for parts or service. This warranty does 

not include any reimbursement or payment of any consequential damages 

claimed to arise from a Product’s failure to comply with the warranty.

Our goods come with guarantees that cannot be excluded under the Australian 

Consumer Law. You are entitled to a replacement or refund for a major failure 

and for compensation for any other reasonably foreseeable loss or damage. 

You are also entitled to have the goods repaired or replaced if the goods fail to 

be of acceptable quality and the failure does not amount to a major failure.

This warranty is in addition to and sits alongside your rights under either the 

COMPETITION AND CONSUMER ACT 2010 (Australia) or the CONSUMER 

GUARANTEES ACT (New Zealand) as the case may be, none of which can be 

excluded.

Procedure for obtaining warranty service: 

Depending on the country in 

which the Product was first purchased, if you believe that your Product does 

not conform with this warranty, you should deliver the Product, together with 

satisfactory evidence of your original purchase (such as a legible copy of the 

sales docket) to Uniden at the addresses shown below. You should contact 

Uniden regarding any compensation that may be payable for your expenses 

incurred in making a warranty claim. Prior to delivery, we recommend that you 

make a backup copy of any phone numbers, images or other data stored on 

your Product, in case it is lost or damaged during warranty service.

UNIDEN AUSTRALIA PTY LTD 

Service Division 

345 Princes Highway, 

Rockdale, NSW 2216

Phone: 1300 366 895

Email: [email protected]

UNIDEN NEW ZEALAND LTD

Service Division

150 Harris Road, East Tamaki

Auckland 2013

Phone: (09) 273 8377

Email: [email protected]

Содержание UH8060NB

































Отзывы: