Operation
24
UNIDEN UH7740NB UH7750NB
UHF CB Transceiver
Priority Watch
To switch Priority Watch On/Off;
1. Press
[MENU/ENTER]
##}#*###}
2. Turn the Rotary Channel Selector at the base or press
on the Remote SPK/
MIC to change the setting between ON or OFF.
3. Press
[MENU/ENTER]
to store the setting.
4. Press and hold
[MENU/ENTER]
to exit from the menu mode.
NOTE
If SCAN is deactivated while it is tuned to an active channel, the UHF
CB Radio will stay on that active channel.
If none of the channels are active, the UHF CB Radio will reinstate the
scan start channel.
NOTE
If OS/GS Scanning is initiated when there are no channels programmed
in OS/GS memory, an error tone will be heard and scanning will not
start (see Programming Scan Channels - below).
Add/Remove Channels from SCAN Memory
Select which Scanning Mode you wish to use
- OS or GS.
Select the channel you want to store.
Press to
[MEM]
store. MEM icon appears
and a short tone beep is heard.
To remove the channel from SCAN
memory, press
[MEM]
once more.
The MEM icon disappears.
