17
UNIDEN Model uh710sx/uh720sx UHF CB Radio
OPERATION
Group Scan(GS) Mode
To change between OS and GS scan;
1. Press
ENT
MENU
four times.
GS setting
ON
or
OFF
will flash.
2. Press
or
to change
the selection.
3. Press and hold
ENT
MENU
to save
and exit.
To initiate scanning,
1. When
CALL
SCAN
is pressed during
Group Scan Mode,
SCN
will blink
and Group Scan Scanning begins.
2. To deactivate GS scanning, press
or
CALL
SCAN
.
1. If SCAN is deactivated while it is tuned to an active
channel, the uh710sx/uh720sx will stay on that active
channel. If none of the channels re- active, the
radio will reinstate the Scan start channel.
2. If GS Scanning is initiated when there are no
channels programmed in GS memory, an error
tone will be heard and scanning will not start.
