12
Turning on the Power
Press and hold the
[POWER]
button.
NOTE
Low-Voltage/High-Voltage Alert
If the power supply voltage exceeds 18VDC, an alert tone
sounds and
HI DC
flashes for 5 seconds. The power source
must not exceed 25VDC otherwise permanent damage
may occur to your radio, which may not be covered by the
manufacturer’s warranty.
If the input voltage falls below 10VDC,
LO DC
flashes for 5
seconds. The power turns off automatically if voltage falls
below 8.5VDC.
Switch your UH6060 OFF and disconnect it from the power
source, before locating the cause of the power supply problem.
UNIDEN UH6060
SCAN
DCS
CTCSS
CALL
MENU
EMG
SQL
INST
Operation
UHF CB Transceiver
