background image

UNIDEN Model uh044sx UHF CB Radio

21

Room Monitor can be temporarily disabled by pressing        
      or      .If no further operation is performed for 45 
seconds then the temporary disable mode ends and 
Room Monitor mode re-activates.
  
1. Press      six times.
2. Press     ,        to select desired setting.
The 5 Room Monitor levels are from 1 (High sensitivity) to 
4 (Low sensitivity) and Off. 
3. Press and hold       to save and exit.

!

If using this feature as Baby Monitor please note 
it is not a replacement for regularly checking the 
safety and security of children.

!

The operating time is limited to the remaining 
charge of the battery and is not suitable for 
continuous overnight use. 

!

If there is any input at EXT SP MIC JACK, 
Room Monitor automatically turns off.

CALL TONE

Your uh044sx radio is equipped with 5 selectable call 
tones that will be transmitted when         is pressed 
momentarily.

1. Press       eight times. The current call tone setting 

flashes.

2. Press      ,       to select desired setting.

The 5 call tones are C1, C2, C3, C4 and C5. 

3. Press and hold       to save and exit.

Current regulations require calling tones to be 
restricted to one transmission per minute. If a 
second transmission is attempted within one 
minute then an error tone will sound.

ENTER

MENU

ENTER

MENU

OPERATION

ENTER

MENU

ENTER

MENU

MEM

CALL

CALL

MEM

Содержание UH044SX





























Отзывы: