Uniden TRU 8880 Series Скачать руководство пользователя страница 85 | Manualshive

Страница: 85 / 100

Uniden TRU 8880 Series Скачать руководство пользователя страница 85

T R O U B L E S H O O T I N G [ 8 3 ]

w w w . u n i d e n . c o m

Severe noise interference.

• Keep the handset away from microwave ovens, computers, remote control toys, wireless

microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical
appliances.

• Move to another location or turn off the source of interference.

The Caller ID does not display.

• The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Call your local telephone company to verify your Caller ID service is current. There may be a

problem with your Caller ID service.

You cannot register the handset
at the base.

• Charge the battery pack for 15-20 hours.
• De-register the handset (see "De-register the Handset" on page 32) and register the handset

(see "Register the Handset" on page 15).

The handset doesn't
communicate with other
handsets.

• De-register the handset (see "De-register the Handset" on page 32) and register the handset

(see "Register the Handset" on page 15).

• Make sure that you have registered all handsets.

The handset or the base can't
join the conversation

• Make sure there are not 2 handsets already using the 3-way conference feature.
• Make sure that another handset or base is not in privacy mode.

Room Monitor feature does not
work.

• Make sure to place the handset(s) within the range of the base.

The answering system does not
work.

• Make sure the base unit is plugged in.
• Make sure that the answering system is turned on.
• Make sure that the message record time is not set to Announce only (see page 26).

Messages are incomplete.

• The incoming messages may be too long. Remind callers to leave a brief message.
• The memory may be full. Delete some or all of the saved messages.

After a power failure, the
outgoing message is deleted.

• Record your greeting again. The default message should remain.

Symptom

Suggestion

T

R

OU

B

L

E

S

HOOT

I

N

G

TRU8880_1st.book 83 ページ２００４年１月７日　水曜日　午後６時３０分

«
...
83
84
85
86
87
...
»

Содержание TRU 8880 Series





































































































Отзывы:

Нет отзывов