Uniden SSE17+1, Руководство пользователя

Страница: 17 / 68

[16]
INST
ALLING
THE
PHONE
10) Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the
oval is down. The retainer holds the handset in place.
Direct Wall Mounting
If you don’t have a standard wall plate, you can mount your phone directly to the wall.
Before doing this, consider the following:
• Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard
when inserting screws into the wall.
• Try to mount your phone within 1.5m of a working phone jack to avoid excessive
cord lengths.
• Make sure the wall material is capable of supporting the weight of the base and
handset.
• Use #10 screws (minimum length of 35mm) with anchoring devices suitable for
the wall material where the base unit will be placed.
1) Insert two mounting screws into the wall, (with their appropriate anchoring
device), 100mm apart. Allow about 3mm between the wall and screw heads for
mounting the phone.
2) Refer to steps 1 through 10 on page 15 to mount the telephone.
35mm
100mm
3mm
35mm
100mm
3mm
INST
ALLING THE PHONE
SSE17+1 OM.indb 16 SSE17+1 OM.indb 16 15/7/08 12:08:29 PM 15/7/08 12:08:29 PM