Uniden SS E15 Series, Руководство пользователя

Страница: 23 / 44

Using the Speed Dial Memory
The speed dial memory allows you to store up to 10 names and numbers in the
handset. You can dial these numbers with just a few key presses.
The speed dial memory is not limited to phone numbers. You can store any
number (up to 20 digits) that you need to enter once your call connects. This is
referred to as Chain Dialing. For example, you can save your bank account
number to speed dial memory. When you call your bank's telephone teller
service and are prompted to enter your account number, simply press the
key and the speed dial number where you stored your account number.
1) With the phone in standby mode, press the
key.
2) Enter to select the speed dial number where you
would like to store this entry. You can also scroll
through the list with the and
keys. Press the key twice.
3) appears and a cursor flashes indicating
that the display is ready for the name to be entered.
If the selected speed dial number is already assigned,
the Edit screen appears. You can select
to edit this entry, select to delete this
entry, or select to choose another speed
dial number.
memory
memory
0 - 9
volume/ /+ volume /
/- select
Storing Names and Numbers in Speed Dial Memory
Store Name
Edit Memory
Delete Memory
Go Back
!
!
When editing the
speed dial
memory, you
must press a key
within 30
seconds or
the phone will
return to standby
mode. If you
return the
handset to the
base, the phone
will return to
standby mode
also.
For New
Zealand, Telecom
access numbers
are pre-
programmed into
speed dial
locations as
follows;
Divert ON: SPD1
Divert OFF:SPD2
Block CID: SPD3
Messages: SPD4
Directory: SPD6
[21]
USING
THE
SPEED
DIAL
MEMOR
Y