Uniden SS E15+1 Series, Руководство пользователя

Страница: 10 / 48

5) Once the handset battery packs
are fully charged, connect the
telephone cord to the
tel line
jack and to a telephone outlet. If
your telephone outlet isn't
modular, contact your telephone
company for assistance.
6) After the phone is connected, pick up the handset from the base and press talk. If
you do not get a dial tone, check the following:
• Be sure the telephone cord is securely connected to both the base and an
active telephone jack.
• Be sure the charge/in use LED is on. If not, check the AC adapter.
• Be sure the handset is fully charged.
• Be sure the battery is installed correctly.
D. Set the Visual Ringer Brightness
The visual ringer switch allows you to set the
brightness of the visual ringer/messages
LED on the base. There are three options to
choose from: high, low and off. If you set the
switch to off,
visual ringer/messages LED
never flashes.
[8]
Australia
Tel Line adaptor
(supplied)