Uniden SDS100, Руководство пользователя

Страница: 23 / 62

17
Button Operation
4 / ATT
• Press to enter the digit 4 in any numeric entry mode.
• In
Channel hold
mode, press Func then 4 to toggle attenuation on/
off for the current channel
• In
Channel hold
mode, press Func then hold 4 for 3 seconds to
toggle global attenuation on/off.
• In Search mode, holding on a frequency, press Func then 4 to
toggle attenuation on/off for the current frequency.
5 / DIM • Press to enter the digit 5 in any numeric entry mode.
• In
Channel hold
mode, press Func then 5 to set the display
brightness level.
6 / WX • Press to enter the digit 6 in any numeric entry mode.
• In
Channel hold
mode, press Func then 6 to toggle weather priority
on/off.
• In Channel hold mode, press
Func
then hold
6
for 3 seconds to go
to weather channel monitoring mode.
7 / IFX • Press to enter the digit 7 in any numeric entry mode.
• In
Channel hold
mode on a conventional channel, press Func then
7 to toggle intermediate frequency exchange on/off for the current
channel.
• In
Search
mode, holding on a frequency, press Func then 7 to
toggle intermediate frequency exchange on/off for the current
frequency.
8 / REV • Press to enter the digit 8 in any numeric entry mode.
• In
Channel hold
mode on a conventional channel, press Func
then
8
to monitor the the repeater input frequency for the current
channel.
• In
Search
mode, holding on a frequency, press Func then 8 to
monitor the the repeater input frequency for the current frequency.
9 / DISP • Press to enter the digit 9 in any numeric entry mode.
• In
Channel hold
mode, press Func the 9 to toggle between simple
and detailed display modes.
0 / LVL • Press to enter the digit 0 in any numeric entry mode.
• In
Channel hold
mode, press Func then repeatedly press 0 to set
the volume offset for the current channel.
. /no/PRI • Press to enter a decimal point for a frequency.
• Press when prompted
Yes/No
to select
No
.
• Press Func then. /no to toggle conventional priority scan.
E/yes
Q. SRCH • Press to select a menu item or save an entry in
Menu
mode
• In
Channel hold
mode, press to store a blinking CTCSS/DCS/NAC.
• In
Channel hold
mode, press Func then E/yes to start a Quick
Search.
• Press Func then E/yes to toggle ID Search mode on/off in Scan
mode (when scanning Trunked System in Favorites List only).