Uniden R9, Руководство пользователя, Страница: 9 / 21

- 9 -
KEY PRESS TO... PRESS AND HOLD TO ...
MUTE/
DIM
• Turn MUTE on and off.
• MUTE on - Press MUTE/DIM to mute
radar, laser, red-light cameras, and
overspeed alarms. Returns to normal
operation 10 seconds after the alert
ends or if a different band is detected
during Mute mode. Mute On displays
for a few seconds.
• MUTE off - Press MUTE/DIM to restore
audible alarms before the 10 second
automatic mute time-out.
MUTE MEMORY
Save a Mute Location (Mute Memory) -
press MUTE/DIM again while Mute On
displays to save that GPS location and
frequency to memory. Mute Memory
displays on the screen.
NOTE: R9 stores 2000 points divided
between Mute Memory and User
Mark locations.
Delete Mute Memory - Press
MUTE/
DIM
while Mute Memory displays; the R9
displays a delete confirmation message.
Press MUTE/DIM again to confirm.
MUTE RED LIGHT CAMERA VOICE ALERTS
Mute the voice alert for a red light camera
alarm. Press
MUTE/DIM
while the voice
alarm for a red light camera sounds. The
voice alarm mutes.
MUTE ALERTS FOR POI OVERSPEED ALERT
AND USER LIMIT SPEED
When R9 alerts you to an overspeed or
speed limit situation (an alarm sounds and
an alert displays), press
MUTE/DIM
to
silence that alarm.
DIM - Changes the display
brightness:
• Auto (Default). Set
brightness levels for the
OLED display (see page
22).
• Bright
• Dim
• Dimmer
• Dark (Dark is off unless
there is alert.)
• Off (Off regardless of
whether or not there is
an alert.)
DELETE RED-LIGHT
CAMERA POINT
During a red-light camera
alert, press and hold
MUTE/DIM to delete the
red light camera point.
A confirmation message
displays.
After confirming this
deletion, R9 will not give
an alert for that camera.