
- 26 -
HOW DO I ...?
TRY THIS...
Set a user mark
Press
MARK
to create a user mark when you are at a
location where there is normally some type of radar.
The R4 announces “User mark logged.” The R4 will
announce when you approach user marks.
R4 shares up to 2,000 points between Mute Memory
and User Marks.
Delete a user mark
Press
MARK
again at that location to delete the user
mark.
R4 shares up to 2,000 points between Mute Memory
and User Marks.
The R4 does NOT ask for confirmation before deleting
single user marks.
Delete ALL user marks
Press and hold
MARK
to delete all user marks.
Delete
All User?
displays and is announced. Press
MARK
again. Delete confirmation message displays and is
announced.
Update the firmware and
database
Refer to www.unidensupport.com for details.
Adjust the time
Go to
Menu/Expert
and select any menu mode. Press
VOL+
to scroll to
GPS
and be sure it is turned on.
Continue scrolling to
GMT
. Select the GMT for your
time zone (see page 23). Press and hold
Menu
to
exit. The time should automatically adjust.
Set up the R4 screen to
get brighter and dimmer
at specific times
Set the Dim level to AUTO using the MUTE/DIM button
on the R4 unit or the MUTE button on the power plug.
Next, set the times that the OLED will get brighter or
dimmer through the Auto Dim menu in the Expert
level. (See page 28.)
FEATURE DETAILS
ALARM PRIORITIES
• GPS Connected / GPS Error / Speed Camera / Red Light Camera / User Mark
Alarm/POI Limit Speed Alarm.
• Laser signal (Alert display style #1)
V
13.5
Laser