-
18
-
• MRCD Alarm
SW
2
MRCD
24.100
GHz
Signal strength indicator (1 - 5)
• Vehicle Low Battery Voltage Warning
Low Battery
THREAT
The R1 detects up to 4 radar band signals (threats) at a single time. The strongest
rader signal is designated as the Priority threat, and its frequency displays on the
OLED. The other three threats (signals) are indicated in the left side of the display. In
the following example, 2 K band, 1 X band, and 1 Ka band threats are detected.
X K Ka
K
24.120
GHz
The
Priority
menu setting determines which type of frequency displays on the OLED
(see page 12). If
Priority
is set to Signal priority, the strongest signal displays on
the OLED. If
Priority
is set to Ka Priority, the Ka band radar signal displays on the
OLED.
AUTO MUTE
When the R1 detects an X, K, or Ka signal, it sounds an alarm at the current volume
level. To make the alarm quieter, turn on Auto Mute. This will reduce the volume to
the level set ( 0 - 5) in the Auto Mute Volume menu (see page 13).
If the current volume level is 0, the R1 will not change the volume to the Auto
Mute Volume level; it will keep the volume level at 0.
Auto Mute ends 10 seconds after the alarm ends unless:
• The same signal is detected within that 10 second period; then, Auto Mute stays
on.